GM 700R4/4L60E/4L65E/4L70E Transmission 3/4 Clutch Red Eagle PowerPack
Made in the USA by Alto Products Corp
Kit Contains
- (6) Internal Splined Red Eagle® Friction Disc
- (6) External Splined Red Eagle® Friction Disc
- (1) Top Pressure Plate 1 (057744) Red Eagle® Friction Plate (2 sided)
- (1) Snap Ring .093”
Technical Note
Always pre-soak all friction elements in recommended ATF for at least 30 minutes before installation. Dimensional differences can exist in various input housings and housing components. In order to have success the recommended clutch pack stack-up must be exact in each and every installation.
You must install all of the 1-sided Red Eagle® friction disc with the friction lining facing up or you will have a catastrophic failure of the 3-4 clutch pack.
Clutch Pack Clearance
After completing assembly of the 3-4 clutch pack, air check with regulated shop air several times to seat all components. Insert feeler gauge between the top friction plate and the bottom of the top pressure plate. For the best overall performance Alto Products Corp. recommends setting the 3-4 clutch pack clearance to .025” - .040” To get the recommend clutch pack clearance you can intermix and/or exchange the top pressure plates or top snap rings.
