The Sonnax Pressure Switch Rebuild Master Pack salvages the transmission control unit and restores normal shift operation by installing a set of four seals and laminate discs from the Sonnax pressure switch rebuild master pack in GM's 6L45E, 6L50E, 6L80E, 6L90E and Generation one 6T75 and 6T70 transmissions. Transmission symptoms included erratic TCC apply, failsafe mode, harsh shift, pressure control out-of-range codes, pressure switch codes, shift codes, slips, flares and bind-ups.
This Kit Includes
- Laminate Discs (4)
- Seals (4)
- Seal Installer
- Piston
- Seal Plunger
- Laminate Installation Tool
Listed GM 6-speed transmissions often set various trouble codes related to failures of fluid pressure switches that are internal to the transmission electro-hydraulic control module (TEHCM). These codes may be accompanied by TCC apply problems or shift irregularities such as slipping, flares, harsh application, and bind-ups. As time goes by, the laminated portions of the pressure switches can breach, preventing normal switch operation. If more than one switch breaks down, failsafe mode can be triggered. Since switches cannot be obtained through OE channels, replacement of the TEHCM was the only previous remedy available.
It is no longer necessary to replace the expensive TEHCM assembly to rectify this concern. Installing Sonnax pressure switch rebuild master pack 124740-TL30 restores normal switch operation, eliminating codes and providing renewed shift performance in all ranges.
- Allows salvage of expensive TEHCM
- Installation tools included in kit
Before installing kit, test switches to verify proper electrical operation. Kit repairs laminate disc and seal failures only; it will not rectify electrical breakdown. See instructions for details.
